Search by: Golf GripsGolf ShaftsGolf Club Heads

$$$
0

Cart $0.00

  

Inazone CNC Micro Groove Satin

Click on the image above for more views


Inazone CNC Micro Groove Satin

  • LH

Inazone CNC Micro Groove Satin

Original OEM Desgin


Hand: 
Add Items to Cart   Add to Cart



The Inazone CNC Micro Groove Wedge Series takes spin, control, and performance to the next level. The new Micro Groove Technology adds surface roughness and is optimized for even more friction at impact. Combine this with the legendary Inazone CNC face and grooves, and golfers will generate even more spin on chips, pitches, and partial shots from any turf condition. This series incorporates a wider sole width near the heel and a narrower sole width near the toe that improve bunker performance without sacrificing versatility.

  • Original OEM Design
Specifications
Loft 48 50 52 54 56 58 60
Lie 64 64 64 64 64 64 64
Weight(+-1) 300 300 300 300 300 300 300
Offset(mm) 2.5 2.25 2.0 1.5 1.0 0.5 0
Bounce 6 7 8 9 12 12 8
Length (Steel) 35.5" 35.5" 35.5" 35.5" 35.5" 35.5" 35.5"
Length (Graphite) 36" 36" 36" 36" 36" 36" 36"


Material 431 Stainless Steel
Diameter .370 Parallel Tip
Finish Satin
 
Diamond Tour Golf Glove

Diamond Tour Golf Glove

$5.99

Ratings and Reviews

for the Inazone CNC Micro Groove Satin

Write A Review

SPIN MACHINE!!   July 29, 2016

If you're a golfer who already spins the ball a lot then stay away from these wedges, they will end up spinning so much that your shots will land and pull back 20 feet. But, if you're like the other 90% of golfers who want more spin on their wedge shots - then BUY THESE NOW! They put an insane amount of spin on the ball, on both full swings as well as chip shots. I used to play bump-n-run type chip shots with my old wedges inside of 20 yards because they would always run out 20-30ft after they land. But now with these I've had to completely change my game because they spin so much that the ball just sticks right where it lands, or at least within a few feet. So now, rather than having to worry about picking the right landing spot on the green and factoring in the break of the green after the ball lands, now I just fire my chip shots right at the flag! I usually will land them a few feet in front of the flag and they just stop on a dime. That has lead to much improved putting stats since I've been leaving the ball much closer to the pin. My last round out I shot my 2nd best round every (81) and a large part of that was thanks to great shots with the wedges.

My only complaint, and it's a very minor one, is that it's a little "clicky" feeling compared to my old forged wedges. But most wedges on the market are cast anyways, so it's not really a knock on the club at all, it's just a little different than what I'm used to. But I'll learn to get used to it in a hurry with how much better these wedges perform.

BOTTOM LINE: You can spend 3-4x as much to get the Titleist SM5 (which this appears to be modeled after), but I promise you they will not be 3-4x better - if any better at all. Heck, for the price of ONE Titleist SM5 wedge you can get a 3 wedge set of these instead! And on top of that they can be built with your choice of shaft, length, and grip.

Price/Value
Playability
Feel

Review by
Skill Level: Advanced
How often do you play?: Multiple times a month


good head  July 9, 2015

I played a Dynacraft 3 wedge set for years but the bounce was wrong on the lob wedge-I finally found these wedge heads that fit my needs as far as the club degrees and bounce I wanted. I got the 50, 56 & 60 wedge heads and put them on Harrison steel shafts-then had the 56 re-pitched to 55 degrees-This is one fine set of matching wedges and quite a bit lighter than my buddy's set of Titleist Vokey wedges. Learn Dave Pelz wedge playing system and then choose a set of heads like these that have the proper degree for what you want and the right bounce for your swing and course playing conditions-hit 5000 shots from inside 100 yards and around the green and you will have a short game few people can match. These heads are very similar to Callaway's wedges-very good heads.

Feel
Price/Value
Playability

Review by
Skill Level: Advanced
How often do you play?: Multiple times a month


They do what they're told   July 5, 2014

Built these with True Temper Dynalite 100s. I've been very pleased with how they play. The backside of the wedge is very playable off the ground, without digging. I use these mostly for short play, and rarely for sand (my main course has little sand). I bought these to replace a Cleveland wedge, and find them every bit the equal of the name brand club.

Price/Value
Playability
Feel

Review by
Skill Level: Intermediate
How often do you play?: Multiple times a week



Write Your Own Review

You're reviewing: Inazone CNC Micro Groove Satin

How do you rate this product? *
  1 star 2 stars 3 stars 4 stars 5 stars
Feel
Price/Value
Playability







 


Newsletter Sign-Up

Diamond Tour Golf E-mail Exclusives

  • Special Offers and Promotions
  • Deal Of The Week specials
  • Product Videos and Reviews
  • New Product Updates

Need help? 1-866-GOLF-123

Entire contents Copyright © 1995-2015 Diamond Tour Golf.

Diamond Tour Golf does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Diamond Tour Golf website or catalog. Prices subject to change without notice.