Review - Turner MT RH Golf Club |
 |
Product Reviews
Diamond Tour Golf
by Chuck
Date Added: Monday 20 October, 2008
I installed this head in 10 degree on a grafaloy pro launch red X stiff. I would have to say that out of the many drivers I have built or OEM clubs I have purchased this is by far the longest and straightest club I have ever owned. I also put together a turner MT 3 wood in 15 degrees with the same shaft (fairway version)with the same result. 300 plus with the driver and 250 plus with the three wood. My only complaint is with chips in the paint due to poor packing during shipping.
Rating:
[4 of 5 Stars!]
I installed this head in 10 degree on a grafaloy pro launch red X stiff. I would have to say that out of the many drivers I have built or OEM clubs I have purchased this is by far the longest and straightest club I have ever owned. I also put together a turner MT 3 wood in 15 degrees with the same shaft (fairway version)with the same result. 300 plus with the driver and 250 plus with the three wood. My only complaint is with chips in the paint due to poor packing during shipping.
Rating:
[4 of 5 Stars!]
by Chip
Date Added: Saturday 04 October, 2008
WOW! I received my new Turner Mt 4 days after I ordered it. I couldn't wait to go to the driving range, so I stepped out my back door and grabbed some tees and a handful of old balls that I had lying around. My first shot was about 250 yards, Straight, and it had just the right amount of air. Second shot was even further. Third shot was just like the other two, but I figured that somebody would be calling the cops with golf balls seemingly flying in from nowhere!.. This is a great club and would encourage anyone to purchase with confidence.
Rating:
[5 of 5 Stars!]
WOW! I received my new Turner Mt 4 days after I ordered it. I couldn't wait to go to the driving range, so I stepped out my back door and grabbed some tees and a handful of old balls that I had lying around. My first shot was about 250 yards, Straight, and it had just the right amount of air. Second shot was even further. Third shot was just like the other two, but I figured that somebody would be calling the cops with golf balls seemingly flying in from nowhere!.. This is a great club and would encourage anyone to purchase with confidence.
Rating:
[5 of 5 Stars!]
by John
Date Added: Saturday 09 August, 2008
First things First.... Diamond Tour greeeat products, quality products, Greeeat Job... I had this club put together, 10 deg loft, FGS Graphite senior flex, Lamkin dual density torsion control grip (Great Grip). This club is fantastic... Hits them long and will help straighten out your shots unless you have a major swing flaw, then no club will cure your slice or hook. I am completely thrilled with the product, quality, and price. Thanks Diamond Tour
Rating: [5 of 5 Stars!]
First things First.... Diamond Tour greeeat products, quality products, Greeeat Job... I had this club put together, 10 deg loft, FGS Graphite senior flex, Lamkin dual density torsion control grip (Great Grip). This club is fantastic... Hits them long and will help straighten out your shots unless you have a major swing flaw, then no club will cure your slice or hook. I am completely thrilled with the product, quality, and price. Thanks Diamond Tour
Rating:
[5 of 5 Stars!]
by Jim
Date Added: Thursday 17 July, 2008
I assembled the Turner MT 10' with a Grafalloy ProLaunch Red stiff flex. This is an EXCELLENT Driver!!! After I made and hit this club I sold my Taylormade r7. I have the Turner set up for a Draw and the only time I find the right side of the fairway is when I want it there!! I am very satisfied with this club and my cost was 1/3 of what a Taylor CGB costs!!! If you are loking to assemble a driver and want the moveable weight techonology LOOK NO FARTHER THAN THIS CLUB!!!
Rating: [5 of 5 Stars!]
I assembled the Turner MT 10' with a Grafalloy ProLaunch Red stiff flex. This is an EXCELLENT Driver!!! After I made and hit this club I sold my Taylormade r7. I have the Turner set up for a Draw and the only time I find the right side of the fairway is when I want it there!! I am very satisfied with this club and my cost was 1/3 of what a Taylor CGB costs!!! If you are loking to assemble a driver and want the moveable weight techonology LOOK NO FARTHER THAN THIS CLUB!!!
Rating:
[5 of 5 Stars!]
by marcel
Date Added: Monday 14 July, 2008
i made a turner mt 10 degre with a graffaloy prototype compt nt 85 regular 47 inches long and winn x17 midsize blue grip. my father in law is 75 year's old and he played three rounds in a row below 77 on a hard par 72.i cured is slice so he hits the ball 30 yards longer ,hitting more greens on is second shots made him feel like he is still 40 years old.
Rating: [5 of 5 Stars!]
i made a turner mt 10 degre with a graffaloy prototype compt nt 85 regular 47 inches long and winn x17 midsize blue grip. my father in law is 75 year's old and he played three rounds in a row below 77 on a hard par 72.i cured is slice so he hits the ball 30 yards longer ,hitting more greens on is second shots made him feel like he is still 40 years old.
Rating:
[5 of 5 Stars!]
by David
Date Added: Tuesday 01 July, 2008
Assembled a 12 degree on a Accuflex Acculaunch 50 A shaft. Have never had a driver that felt this good. I am getting 25-30 yards longer tee shots and by putting a 6g weight in the heal, have virtually eliminated my slice.
Rating: [5 of 5 Stars!]
Assembled a 12 degree on a Accuflex Acculaunch 50 A shaft. Have never had a driver that felt this good. I am getting 25-30 yards longer tee shots and by putting a 6g weight in the heal, have virtually eliminated my slice.
Rating:
[5 of 5 Stars!]
by Derek
Date Added: Friday 27 June, 2008
The club i am using is not this exact one but it is a clone of the r7 cgb max. all i can say when i first said was y did i get a new one it was slicing worst then my old one but then i tried to draw the without even changing the waits around and bam 250-280(when it usualy goes 180 then start moving side ways) with perfect hight but at first i was like aw crap i hooked it then it started flying back in then i hit 3 similar shots. then yesterday I went to the course and the course i am playing at is left handed heave cause almost all the whole are 400 yard dog-leg lefts anyways i was hitting those draws so good with this club i was turning the corner. So dont give up if you are still hitting slices :)
Rating: [5 of 5 Stars!]
The club i am using is not this exact one but it is a clone of the r7 cgb max. all i can say when i first said was y did i get a new one it was slicing worst then my old one but then i tried to draw the without even changing the waits around and bam 250-280(when it usualy goes 180 then start moving side ways) with perfect hight but at first i was like aw crap i hooked it then it started flying back in then i hit 3 similar shots. then yesterday I went to the course and the course i am playing at is left handed heave cause almost all the whole are 400 yard dog-leg lefts anyways i was hitting those draws so good with this club i was turning the corner. So dont give up if you are still hitting slices :)
Rating:
[5 of 5 Stars!]
by Luong
Date Added: Thursday 19 June, 2008
I cracked the earlier version of the turner driver (r7 compatible), DTG was super great - replaced my driver head with this Turner MT (Taylor Made CGB clone) ... and I couldn't believed it - DTG also put in a new grip free of charge since I worn out my old one. This head natural state is draw bias, so a few hex screw turns later (more weight in heel than toe), it straighten out nicely. Club face is soft, ie. good for slower golf swing (less than 95mph) but it can really go nifty far. That said, my swing is around 105-110mph, so I must delay my wrist-snap to avoid hooking the ball. Yep, I managed to crushed a few balls close to 300 yards (probably carried around 280-ish yards). I might as well order the Turner Ablaze (burner), however I already bought a Cleveland XL driver in March. I broke CG driver already too, so it is in CG shop now. I can hit XL 20 yards longer than this turner MT - probably because the XL driver shaft is 1 inch longer. I wouldn't hesitate to recommend this driver for slow swinger - very forgiving & long. ...
Rating: [5 of 5 Stars!]
I cracked the earlier version of the turner driver (r7 compatible), DTG was super great - replaced my driver head with this Turner MT (Taylor Made CGB clone) ... and I couldn't believed it - DTG also put in a new grip free of charge since I worn out my old one. This head natural state is draw bias, so a few hex screw turns later (more weight in heel than toe), it straighten out nicely. Club face is soft, ie. good for slower golf swing (less than 95mph) but it can really go nifty far. That said, my swing is around 105-110mph, so I must delay my wrist-snap to avoid hooking the ball. Yep, I managed to crushed a few balls close to 300 yards (probably carried around 280-ish yards). I might as well order the Turner Ablaze (burner), however I already bought a Cleveland XL driver in March. I broke CG driver already too, so it is in CG shop now. I can hit XL 20 yards longer than this turner MT - probably because the XL driver shaft is 1 inch longer. I wouldn't hesitate to recommend this driver for slow swinger - very forgiving & long. ...
Rating:
[5 of 5 Stars!]
by Ben
Date Added: Thursday 19 June, 2008
I have driven the ball further and straighter with this club. I'm very happy with it and would recommend it. My only gripe is the paint quality. It seems to chip too easily.
Rating: [5 of 5 Stars!]
I have driven the ball further and straighter with this club. I'm very happy with it and would recommend it. My only gripe is the paint quality. It seems to chip too easily.
Rating:
[5 of 5 Stars!]
by jack
Date Added: Monday 16 June, 2008
I HAVE TRIED MANY DIFFERENT CLONES AND THIS CLUB IS POSSIBLY THE FINEST DRIVER I HAVE EVER USED. LONG, SOLID AND SETS UP GREAT . DO NOT HESITATE THIS CLUB IS THE REAL DEAL.THANK YOU DIAMOND TOUR GREAT SERVICE AS ALWAYS
Rating: [5 of 5 Stars!]
I HAVE TRIED MANY DIFFERENT CLONES AND THIS CLUB IS POSSIBLY THE FINEST DRIVER I HAVE EVER USED. LONG, SOLID AND SETS UP GREAT . DO NOT HESITATE THIS CLUB IS THE REAL DEAL.THANK YOU DIAMOND TOUR GREAT SERVICE AS ALWAYS
Rating:
[5 of 5 Stars!]
by Craig
Date Added: Sunday 15 June, 2008
I purchased this driver a couple of weeks ago and have had a chance to play 2 rounds with it now. My first round was spent feeling it out and the 2nd round I increased my tee distance by 35 yards and almost completely eliminated my wild slice. I cannot say enough great things about this club. I will soon be adding a Turner hybrid and Turner fairway wood.
Rating: [5 of 5 Stars!]
I purchased this driver a couple of weeks ago and have had a chance to play 2 rounds with it now. My first round was spent feeling it out and the 2nd round I increased my tee distance by 35 yards and almost completely eliminated my wild slice. I cannot say enough great things about this club. I will soon be adding a Turner hybrid and Turner fairway wood.
Rating:
[5 of 5 Stars!]
by Ben
Date Added: Tuesday 20 May, 2008
I recently bought this club and was nervous because I had a Ping G5. I took the club out, and I counld not believe that I was out-driving my Ping G5 driver by 30 yds. I am consistantly hitting this club 330yds and straight. i have the V2 extra stiff shaft, and the ball soars. on my first outing, a weight broke off into the head of this driver, I contacted Diamond Tour, they sent me a return label paid for, and told me to send it back free of charge. Well, I now have recieved by driver back from Diamond Tour within a weeks time and it looks brand new. I recieved a tracking number to track the shipment to and from. THIS HAS BEEN THE BEST PURCHASING EXPERIENCE I HAVE EVER HAD PURCHASING ONLINE. FIVE STAR SERVICE AND PRODUCTS....
Rating: [5 of 5 Stars!]
I recently bought this club and was nervous because I had a Ping G5. I took the club out, and I counld not believe that I was out-driving my Ping G5 driver by 30 yds. I am consistantly hitting this club 330yds and straight. i have the V2 extra stiff shaft, and the ball soars. on my first outing, a weight broke off into the head of this driver, I contacted Diamond Tour, they sent me a return label paid for, and told me to send it back free of charge. Well, I now have recieved by driver back from Diamond Tour within a weeks time and it looks brand new. I recieved a tracking number to track the shipment to and from. THIS HAS BEEN THE BEST PURCHASING EXPERIENCE I HAVE EVER HAD PURCHASING ONLINE. FIVE STAR SERVICE AND PRODUCTS....
Rating:
[5 of 5 Stars!]
by Bill B
Date Added: Monday 21 April, 2008
This club is for real. I have always had trouble with lifting my driver off the ground. Custom fitting the Turner MT with an FGS 60 shaft and playing around with the weights has allowed me to hit a nice high cut off the tee. Playing golf is alot easier when you can play off the short grass from inside 150 yards and the Turner MT has allowed me to do it
Rating: [5 of 5 Stars!]
This club is for real. I have always had trouble with lifting my driver off the ground. Custom fitting the Turner MT with an FGS 60 shaft and playing around with the weights has allowed me to hit a nice high cut off the tee. Playing golf is alot easier when you can play off the short grass from inside 150 yards and the Turner MT has allowed me to do it
Rating:
[5 of 5 Stars!]
by yep
Date Added: Wednesday 09 April, 2008
i bought this club to see if clones could compare to name brand so i dont have to spend all that $ jus for a name!!and i dont have...man let me tell you this club is no joke; my miss hits out drive everyone...this club is all sweet spot but it can be worked left or right...have a 65S Graffaloy Prolaunch shaft 10 degree...ima buy another one just to have a backup...i have 5 handicap, 5'7,180, 300 yard bombs easily and its wet out...cant wait for it to dry up...$140 unbeatable...believe me dont waste your $ on name brand
Rating: [5 of 5 Stars!]
i bought this club to see if clones could compare to name brand so i dont have to spend all that $ jus for a name!!and i dont have...man let me tell you this club is no joke; my miss hits out drive everyone...this club is all sweet spot but it can be worked left or right...have a 65S Graffaloy Prolaunch shaft 10 degree...ima buy another one just to have a backup...i have 5 handicap, 5'7,180, 300 yard bombs easily and its wet out...cant wait for it to dry up...$140 unbeatable...believe me dont waste your $ on name brand
Rating:
[5 of 5 Stars!]
by Mike
Date Added: Friday 04 April, 2008
Assembled a 12 degree on a Graffoly Prolaunch 65. This is an awesome combination!!! Use to hit a bad fade but the moving of the weights helped to straiten the ball flight. Great Head!!
Rating: [5 of 5 Stars!]
Assembled a 12 degree on a Graffoly Prolaunch 65. This is an awesome combination!!! Use to hit a bad fade but the moving of the weights helped to straiten the ball flight. Great Head!!
Rating:
[5 of 5 Stars!]